Design Features
- Four column heavy duty structure provides great stability and low noise levels
- Fully-automatic press: lower rolls and fill cams adjusted by servo motors
- Sealed roller bearings in all pressure rolls eliminate oil leaks in rolls
- Mechanical feed system forces material into die increasing production output
- Upper and lower die table dust collection with die table scrapper keeps press clean longer
- Automatic punch lubrication ensures long life of tooling and cams
- Cleanly designed hopper and butterfly valve assembly prevents loss of powder
- Extra-large hopper opening helps material flow
- Enhanced lighting in upper and lower sections for better visibility
- Equipped with OSHA approved safety interlocks
![](https://ccscontrolsystems.com/wp-content/uploads/2021/11/Rotary-engine-png.webp)
Servo drives
- Isolated compression zone keeps press clean
- Allen Bradley Servo Motors for lower rolls and fill cams with accurate encoder position feedback
Rigid Construction
- Three 10 ton compression stations on the single sided press allow for dual pre-compression for direct compressible powders and optional bi-layer production
- All compression stations (pre and final) use identical components to reduce spare parts inventory
- Four LED lights illuminate the compression zone for clear observation during production and cleaning
![](https://ccscontrolsystems.com/wp-content/uploads/2021/11/Servo-drives-png.webp)
![](https://ccscontrolsystems.com/wp-content/uploads/2021/12/560-3-jpeg.webp)
- Dual level, three paddle mechanical feeder design maintains powder head pressure for uniform filling of the dies
- Wide opening inlet improves powder flow ability on difficult powders at higher production speeds
- Colored lights mounted in the press frame illuminate the doors to indicate tablet press status
- Stack light not required
- Heavy Duty upper doors eliminate door vibrations for quiet operation
![](https://ccscontrolsystems.com/wp-content/uploads/2021/12/560-5-jpeg.webp)
![](https://ccscontrolsystems.com/wp-content/uploads/2021/12/cs1500-png.webp)
Optional CS Control System is designed with all Allen Bradley components for an economical control system (which can be retrofitted to any make and model of tablet press) lets you:
- Increase efficiency
- Increase reliability
- Increase performance
- Increase safety
Technical specifications
Model | BB-61 | B-51 | D-41 |
---|---|---|---|
No. of Punches | 61 | 51 | 41 |
RPM Speed (min-max) | 8-80 | 8-80 | 8-80 |
Max. Output (tablets/h) | 292,800 | 244,800 | 196,800 |
Max. Tablet Dia. (mm) | Ø13 | Ø16 | Ø25 |
Die Dia. (mm) | Ø24 | Ø30 | Ø38 |
Motor Power (KW) | 15 | 15 | 15 |
Main pressure (KN) | 100 | 100 | 100 |
Pre-pressure # 1 KN | 100 | 100 | 100 |
Pre-pressure # 2 KN | 100 | 100 | 100 |
Max. Filling Depth | 19 | 19 | 19 |
Dia. of Punch (mm) | 19 | 19 | 25.35 |
Pitch Circle Diameter (mm) | 560 | 560 | 560 |
Weight (kg) | 4000 | ||
Dimension (mm) (L x W x H) | 1180 x 1180 x 2035 |