Three Point Transit Leveling
This arrangement permits simple and precise setups of feed frames. No resetting of the feeder is required.
Stainless Steel Hopper
Hoppers contain vertical adjustment and lock provisions.
Dust Removal Suction Nozzles
These nozzles are positioned above and below the die table for clean operation.
Adjustable Upper Roll
This upper roll permits compacting of tablets at various points in the die to extend the die's life. The roll also minimizes capping and laminating of tablets.
Keywayed Upper Punch Sockets
Provide punch alignment when producing tablets of irregular shape are standard.
Pin Type Transit Level Feeder
A pin type transit level feeder funnels material directly over the die cavity. Stationary pins cause a cascading action that improves filling of the dies for accurate tablet weight. An adjustable gate also maintains fluidity tunnel of granulation and prevents packing in the frame.
Safety Features
Locking the lever in a disengaged position reduces the likelihood of accidental starting. All guards are interlocked to prevent access during operation.
Adjustable Spring Release
The release maintains desired pressure and helps protect tools against damage or breakage in case of accidental overload. Pneumatic release is optional.
Technical specifications
| Model 512-1 | Model 512-2 | |
|---|---|---|
| Production Rate (TPM) | 400-1,200 | 550-1,650 |
| Number of Tool Stations | 16 | 22 |
| Fill Depth, Adjustable Range (in.) | 0-11/16 | 0-11/16 |
| Maximum Tablet Diameter (in.) | 5/8 | 7/16 |
| Capsule Shape (in.) | 3/4 | 5/8 |
| Maximum Operation Force (tons) | 4 | 4 |
| Upper Punch Entrance (in.) | 1/8-3/8 | 1/8-3/8 |
| Pressure Roll Diameter (in.) | 8 | 8 |
Dust Collection Nozzles & Connections
| Number | 1 | 1 |
|---|---|---|
| Size | I.D. - 1-1/4 – 1-1/2 O.D. | I.D. - 1-1/4 – 1-1/2 O.D. |
| Recommended Dust Collection Capacity 3" H2 S.P. @ each nozzle orifice (cfm) | 50 (two orifices) | 50 (two orifices) |
| Hopper Capacity | 870 | 870 |
